Platform II Explored: Revolutionising Construction

Unlike a bagged vacuum, where air passes directly through the bag, a cyclonic vacuum cleaner.

Rinse it in cold water until it runs clear, squeeze out excess liquid, then allow it to fully dry..The second filter is located inside the ball itself.

To access it, you’ll need to lie the vacuum on its back and unscrew the side of the ball.The filter is actually two parts – a foam ring and an outer shell – and you should separate these to wash separately.Again, you can rinse the filter with cold water, but.

squeeze dry this filter.. As a general rule, Dyson recommends cleaning both filters on the Ball Animal 2 at least once each month.. You should always allow the filters to try for at least 24 hours before you put them back into the vacuum cleaner.A wet filter will clog faster, may allow bacteria to grow, and risks water being sucked into the vacuum’s motor..

Both the filters on the Dyson Ball Animal 2 are washable, but this may not be the case for other models.

Make sure you check the manual before washing a filter.. Don’t Overfill the Dust Canister!.Or do you want to share other carpet cleaning tips?

Let us know in the comments section below.Not sure whether a cyclonic vacuum cleaner is the right choice for your home?Keep reading to learn how cyclonic vacuums work and their advantages over bagged alternatives.. Bagless vacuums with cyclonic technology have become the dominant type of cleaner over the last few decades.

Popularised by Dyson, there are now many manufacturers who build cyclonic vacs..But how do cyclonic vacuums actually work?